506 found, showing page 30 of 34
M3-0.50 x 6 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M3-0.50
- Length: 6 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M3-0.50 x 8 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M3-0.50
- Length: 8 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M3-0.50 x 10 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M3-0.50
- Length: 10 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M3-0.50 x 12 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M3-0.50
- Length: 12 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M3-0.50 x 16 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M3-0.50
- Length: 16 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M3-0.50 x 18 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M3-0.50
- Length: 18 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M3-0.50 x 20 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M3-0.50
- Length: 20 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M3-0.50 x 25 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M3-0.50
- Length: 25 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M3-0.50 x 30 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M3-0.50
- Length: 30 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M4-0.70 x 6 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M4-0.70
- Length: 6 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M4-0.70 x 10 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M4-0.70
- Length: 10 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M4-0.70 x 12 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M4-0.70
- Length: 12 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M4-0.70 x 16 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M4-0.70
- Length: 16 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M4-0.70 x 20 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M4-0.70
- Length: 20 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
M4-0.70 x 25 mm Phillips Pan Head Machine Screw
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
- Diameter: M4-0.70
- Length: 25 mm
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
View Details
Call for Price
